- A+
Brother Printer Resetting Guide: Clearing DCP7080
If you are using a Brother DCP7080 printer and you have noticed that it is not functioning properly, resetting the printer might be the solution to your problems. By resetting the printer, you can clear any errors and issues that might be preventing your printer from functioning normally. In this guide, we will walk you through the steps you need to take to reset your Brother DCP7080 printer.
Step 1: Turn off the printer
The first step in resetting your Brother DCP7080 printer is to turn it off completely. Disconnect the power cord from the printer and wait for about 10 seconds before proceeding to the next step. This will ensure that the printer is completely powered off and any errors are cleared from its memory.
Step 2: Reset the drum unit
The next step is to reset the drum unit of your Brother DCP7080 printer. To do this, open the front cover of the printer and press the Clear/Back button. Keep the button pressed for about 2 seconds until the drum unit is reset. Then, close the front cover of the printer.
Step 3: Reset the toner counter
After resetting the drum unit, you need to reset the toner counter. To do this, press and hold the Go button on the printer. Keep the button pressed until all the LEDs on the printer light up. Then, release the Go button.
Step 4: Print a test page
Once you have reset the drum unit and the toner counter, it is time to print a test page to ensure that the printer is functioning properly. To print a test page, press and hold the Go button for about 4 seconds until the printer starts printing. The test page will display information about your printer, including its firmware version, IP address, and paper tray settings.
Step 5: Reconnect the printer
After printing the test page, reconnect the power cord to the printer and turn it on. Your Brother DCP7080 printer should now be reset and functioning properly. You can now resume your printing tasks without any issues.
Conclusion
Resetting your Brother DCP7080 printer is a simple process that can help you clear any errors or issues that might be affecting its performance. By following the steps outlined in this guide, you can easily reset your printer and continue with your daily printing tasks. If you continue to experience issues with your printer, consider contacting Brother support for further assistance.
