- A+
Introduction
As an Epson L358 printer user, you might have come across a message indicating that your ink pads are nearing the end of their service life. This message appears after printing with the printer for a long time, and it means you need to replace the waste ink pads. In this guide, we'll take you through the steps of replacing the waste ink pads on your Epson L358 printer.
Step 1: Preparation
Before you start the process of replacing the waste ink pads, you need to prepare your workspace. First, ensure that the printer is turned off and unplugged from the power source. Next, you will need an Allen key, a screwdriver, and gloves to avoid coming into direct contact with ink spillover. You can also prepare some clean, dry, and soft cloth to clean any ink or dust.
Step 2: Remove the Cover of the Printer
The first step to replacing the waste ink pads is to remove the cover of the printer. You can do this by using the Allen key to remove the screws, which hold the cover in place. Once you remove the screws, gently lift the cover of the printer and set it aside.
Step 3: Locate the Waste Ink Pads
After removing the cover of the printer, locate the waste ink pads. The waste ink pads are located on the right side of the printer, towards the back. They are two rectangular sponge pads that collect excess ink during printing. You will notice that they are soaked with ink, indicating the need for a replacement.
Step 4: Remove the Waste Ink Pads
To remove the waste ink pads, you will need to use your hands to gently pull them out of their position. You can use gloves for protection from ink spillage. Once you remove the pads, dispose of them safely, as they contain hazardous material.
Step 5: Install New Waste Ink Pads
After removing the old waste ink pads, it's time to install new ones. You can purchase new waste ink pads online or from an Epson dealer. Gently place the new waste ink pads in the same position as the previous ones, ensuring they are secure. Remember to put on gloves for your protection.
Step 6: Reassemble the Printer
After installing new waste ink pads, you can now reassemble the printer. Place the cover of the printer back in position, and use the screws to hold it in place. Ensure that all screws are tightened, but do not overtighten them. Once done, plug the printer back into the power source and turn it on.
Conclusion
Replacing the waste ink pads on your Epson L358 printer is easy and straightforward. By following these simple steps, you can extend the life of your printer and enjoy high-quality prints for a long time. Remember to take precautions to avoid ink spillage during the process, and dispose of the old ink pads safely. If you encounter any problems during the process, seek the assistance of an experienced technician.
