- A+
Brother HL2240 Printer Resetting Method - A Guide in Under 50 Words
The Brother HL2240 printer may occasionally experience issues that require it to be reset. This can be done easily by following these simple steps:
Step 1: Turn off the printer
Make sure the printer is turned off by pressing the power button. Wait for it to fully power down before proceeding with the next step.
Step 2: Press and hold the Go button
While the printer is off, press and hold the Go button. Keep holding it down until the Toner, Drum and Error LEDs light up.
Step 3: Release the Go button
After a few seconds, release the Go button. Make sure all the LEDs turn off.
Step 4: Press the Go button six times
Quickly press the Go button six times. The Toner, Drum and Error LEDs should all light up again.
Step 5: Close the front cover
Close the front cover of the printer. The LEDs should turn off, and the printer will reset itself.
These simple steps can help you reset your Brother HL2240 printer in just a few minutes. Remember to follow them carefully to avoid any further issues with your printer.
