- A+
Brother Printer Ink Resetting Method for New Toner Cartridges
Brother printers are popular for their high-quality printing capabilities and cost-effective printing. With the introduction of new toner cartridges in the market, it becomes important to reset the ink levels for the printer. This article will guide you on how to reset the ink levels of your Brother printer when installing a new toner cartridge.
Understanding the Need to Reset Ink Levels
When a new toner cartridge is installed in the Brother printer, it comes with a chip that records the ink level. However, the printer might still display the old ink level, which might prevent you from receiving a low-toner warning. Hence, it is essential to reset the ink levels to get accurate information on the ink levels after installing a new toner cartridge.
Resetting Ink Levels in Brother Printer
The following are the steps to reset the ink levels in the Brother printer:
Turn off the Brother printer and remove the cartridge and drum unit from the printer.
Press the go button seven times. You will see the "Reset Menu" screen on the printer's display panel.
Select the toner cartridge that you want to reset from the list on the display screen.
After selecting the cartridge, press the OK button.
Now, the printer will reset the ink level of the selected toner cartridge automatically.
Reinstall the cartridge and drum unit back into the printer.
Turn on the printer and check the ink levels to ensure that the reset was successful.
Troubleshooting Ink Level Reset Issues
In some cases, the Brother printer may not reset the ink levels even after following all the above steps. This can be due to the following reasons:
Lack of toner in the cartridge
Inexact alignment of the toner cartridge when installed
Installation of an incorrect toner cartridge
If you are facing any of the above issues, you can try the following troubleshooting methods to fix them:
Ensure that there is a sufficient amount of ink in the toner cartridge
Check the alignment of the cartridge and reinstall it correctly if needed
Verify that the toner cartridge being used is compatible with your Brother printer.
Conclusion
Resetting the ink levels of your Brother printer is a simple yet crucial step when installing a new toner cartridge. By following the above steps, you can ensure that your printer's ink levels are accurately displayed, and you receive timely low-toner warnings. Lastly, if you face any difficulties in resetting the ink levels, try troubleshooting the issues mentioned above, and you will be good to go.
