- A+
Brother Printer 910DW How to Reset to Default in Simple Steps
Brother Printer 910DW is a versatile printer that comes with a range of features. While the printer is known for its durability and efficiency, there are times when the printer may experience malfunctions or errors, making it necessary to reset the printer to its default settings. The reset process can be a bit intimidating, but it is necessary to restore the printer to its original state and allow it to function properly. This article will guide you on how to reset your Brother Printer 910DW to the default settings in just a few simple steps.
Step 1: Turn off the printer
The first thing you want to do is to turn off the Brother Printer 910DW. This will reduce the risk of the printer getting damaged during the reset process. Ensure you switch off the printer correctly by pressing the power button.
Step 2: Disconnect the power cable
After turning the printer off, disconnect the power cord from the printer. This will ensure that the printer is not connected to a power source, which is necessary before performing a reset.
Step 3: Wait a few minutes
With the power cable disconnected, wait for a few minutes before proceeding to the next step. This allows the printer to cool down and ensures that any residual power stored in the printer's components is discharged.
Step 4: Reconnect the power cable
The next step is to reconnect the power cable to the printer. Ensure that the cable is firmly connected and that there are no loose connections. Once the cable is securely connected, you can proceed to the next step.
Step 5: Turn on the printer
Press the power button to turn on the printer. Ensure that the printer is connected to a stable power source. This will allow the printer to boot up and perform a self-diagnostic check.
Step 6: Press and hold the Go button
Press and hold the Go button for about five seconds. The Go button is usually located on the printer's control panel, and holding it down should trigger a "Toner, Drum, and Error" lights sequence.
Step 7: Release the Go button
After five seconds, release the Go button. This will reset the printer to its default settings, and the printer should start up and resume its normal operations.
Conclusion
Resetting your Brother Printer 910DW to its default settings can help solve many errors or issues that may occur during printer operations. Following the above steps ensures that the reset process is done successfully. In case the printer still experiences errors or issues even after resetting, it is advisable to contact the manufacturer for further assistance.
