- A+
Introduction
L3168 is a high-performance printer that is widely used in homes and offices. Over time, printers accumulate ink waste in a special pad to ensure that the inkjet heads stay clean. This pad is called the waste ink pad or the waste ink absorber. When the pad is full, the printer will stop printing until the pad is replaced. In this article, we will show you how to replace the waste ink pad for the L3168 printer.
Step 1: Prepare Your Printer
Before you start replacing the waste ink pad, make sure that the printer is turned on and connected to your computer. Also, make sure that you have a new waste ink pad ready to install.
Step 2: Access the Waste Ink Pad
To access the waste ink pad, you will need to remove the printer cover. On the L3168 printer, the cover is located on the top of the printer. Gently remove the cover by pulling it towards you. Once the cover is removed, you should be able to see the waste ink pad.
Step 3: Remove the Waste Ink Pad
After you have accessed the waste ink pad, you will need to remove it from the printer. The waste ink pad is held in place with clips or screws. Carefully remove the clips or screws and detach the waste ink pad from the printer. Dispose of the old waste ink pad properly.
Step 4: Install the New Waste Ink Pad
Once you have removed the old waste ink pad, it is time to install the new one. Simply place the new waste ink pad in the same position as the old one, and secure it in place with clips or screws.
Step 5: Reset the Waste Ink Counter
After you have installed the new waste ink pad, you will need to reset the waste ink counter. Failure to do so will result in the printer still refusing to print. The process for resetting the counter can vary depending on the printer model, but it can usually be done using the printer software on your computer.
Step 6: Close the Printer Cover
Once the waste ink pad has been replaced and the waste ink counter has been reset, it is time to close the printer cover. Make sure that it snaps securely into place.
Conclusion
Replacing the waste ink pad for your L3168 printer is a simple process that can help extend the life of your printer. By following the steps outlined in this article, you can easily replace the waste ink pad and get your printer back up and running in no time. Remember to dispose of the old waste ink pad properly and reset the waste ink counter to ensure continued printing.
