- A+
Brother 2560DW Printer Factory Reset Guideline
If you need to reset your Brother 2560DW printer to its factory default settings, follow the below instructions.
Step 1: Turn off the printer
First, to start resetting your printer, turn it off and unplug it from the power source. This process is important since it ensures that you don’t interfere with any ongoing printing tasks.
Step 2: Press down the cancel button
After switching off the printer, you need to press and hold the ‘Cancel’ button for at least 15-20 seconds. While holding down the button, plug in the printer to the power source and turn it on.
Step 3: Release the ‘Cancel’ button
When the printer is turned on, continue holding the ‘Cancel’ button for an additional 5-10 seconds, then release it. You will view the ‘Drum’ light on the printer blink for several seconds, indicating that the factory reset process has been initiated.
Step 4: Complete the factory reset process
Wait for the printer display to show the 'Ready' message. This means that the factory reset process is complete, and you can now make fresh printer settings. You may need to input the printer language, time, date, and other personalized features.
Step 5: Test the printer
Once the factory reset process is complete, do a test print to see if everything is running correctly. If the printer does not work, the factory reset was not successful, and you'll need to revisit the above steps to make sure you do everything correctly.
Conclusion
If your Brother 2560DW printer is experiencing issues and needs a fresh start, resetting it to its factory settings is a good option before opting for new replacements. This process is relatively easy and can be done with minimal effort. As a result of this factory reset, your printer should efficiently run as expected from one in pristine condition.
