- A+
Introduction
Brother J430W is a popular printer model known for its high-quality printing. Sometimes, it may develop errors, which may make it difficult for the printer to function properly. One of the most common issues that the J430W printer develops is the ‘ink absorber full’ error message. When this error message pops up, it means that the ink absorber pad in the printer has reached its maximum capacity, and it needs to be reset. Clearing the printer’s ink absorber pad is known as “resetting the printer." This article will show you how to clear the Brother J430W printer's ink absorber and reset it with ease.
How to Clear the Ink Absorber Pad in Brother J430W
The process of clearing the ink absorber pad in Brother J430W is straightforward. These are the steps to follow:
Turn off the Brother J430W printer and unplug it from the power source.
Open the printer cover to reveal the ink cartridges.
Locate the ink absorber pad. It is a rectangular-shaped foam pad located at the bottom of the printer.
Using a pair of tweezers, gently remove the ink absorber pad from the printer.
Rinse the ink absorber pad in warm, running water to remove any ink stains.
Lightly squeeze the ink absorber pad to remove any excess water.
Put the ink absorber pad back in its original position in the printer.
Close the printer cover.
After you have cleared the ink absorber pad, you need to reset the Brother J430W printer to remove the ‘ink absorber full’ error message. Below are the steps to reset the printer.
Resetting the Brother J430W Printer
To reset the Brother J430W printer, follow these steps:
Press the power button to turn on the printer.
Press the ‘Menu’ button on the printer until the ‘Ink’ menu is displayed.
Press the ‘Up’ or ‘Down’ arrow keys to select ‘Maintenance'
Press the ‘OK' button.
Press the ‘Up’ or ‘Down’ arrow keys to select ‘Ink Level’.
Press the ‘OK' button twice.
Press the ‘Up’ or ‘Down’ arrow keys to select ‘Exit.’
Press ‘OK' to exit the settings.
After resetting the printer, the ‘ink absorber full’ error message should disappear, and the Brother J430W printer should function correctly.
Tips and Warnings
It’s essential to note that resetting the Brother J430W printer will clear all the stored print jobs and restore the printer to its default factory settings. Therefore, it’s recommended to transfer any stored print jobs to a different printer before resetting the Brother J430W printer.
If you encounter any problems or errors while resetting the printer, you can try resetting the printer again. If the problem persists, it’s recommended to contact the manufacturer's customer care for further assistance.
Conclusion
Resetting the Brother J430W printer is a straightforward process that anyone can do without professional help. Clearing the ink absorber pad and resetting the printer will help resolve any errors that may occur and ensure that the printer functions correctly. By following the steps outlined in this article, you can successfully reset your Brother J430W printer and enjoy its high-quality printing capabilities.
