- A+
Introduction
Brother 706 printer is a multifunctional printer that is widely used in offices and homes. Sometimes, due to various reasons, you may need to reset the printer to its factory settings. In this article, we will guide you on how to reset Brother 706 printer and clear any errors that may be interfering with its operations.
Step-by-Step Guide on How to Reset Brother 706 Printer
The following is a step-by-step guide on how to reset Brother 706 printer:
Step 1: Turn off the Printer
The first step is to turn off the printer by pressing the power button and disconnect it from any power source.
Step 2: Open the Front Cover
Open the front cover of the printer and locate a small button labeled "GO" or "Job Cancel". Press and hold this button for about 10 seconds until all the lights on the printer turn off.
Step 3: Turn on the Printer
While still holding the "GO" or "Job Cancel" button, turn on the printer by pressing the power button. Keep holding the button until the "Toner", "Drum" and "Error" lights turn on. Then release the button.
Step 4: Press the "GO" Button
Press the "GO" button six times in rapid succession. The "Error" light should turn off, and the "Ready" light should turn on. If that doesn't happen, repeat step 4 until it does.
Step 5: Close the Front Cover
Close the front cover of the printer. The printer should now be reset to its factory settings, and any errors that were interfering with its operation should be cleared.
Conclusion
Resetting Brother 706 printer to its factory settings can be a quick and easy process if you follow the above steps carefully. Remember to turn off the printer, hold the "GO" or "Job Cancel" button, turn on the printer, press the "GO" button six times rapidly and finally close the front cover. If you are still experiencing any issues after resetting your Brother 706 printer, seek help from a professional.
