- A+
Introduction
The Epson LQ635 is a dot-matrix printer that is popular for its high-quality printing and durability. However, like any other printer, it may sometimes require maintenance to continue producing great prints. One of the most common maintenance tasks is resetting the printer, which can help fix errors and restore the printer to its default settings. In this article, we will discuss how to reset the Epson LQ635 dot matrix printer.
Step 1: Turn off the Printer
Before you can start resetting the Epson LQ635 printer, you need to turn it off. This is important as it ensures that the printer is completely powered down and there is no risk of damage during the reset process. Make sure that the printer has completely stopped all its operations before proceeding to the next step.
Step 2: Hold Down the Load/Eject Button
Locate the Load/Eject button on your Epson LQ635 printer's control panel and press and hold it down. While holding down the button, turn on the printer. Keep holding the Load/Eject button for around five seconds or until you see the self-test printout start.
Step 3: Release the Load/Eject Button
Once the self-test printout starts, you can release the Load/Eject button. The self-test printout typically contains information about the printer, such as the firmware version and other technical details. Check the printout to ensure that everything is in order and there are no error messages or other issues.
Step 4: Turn off the Printer Again
After the self-test printout is complete, turn off the printer and wait for a few seconds. This step ensures that all reset commands have been executed by the printer's firmware and there are no pending reset actions.
Step 5: Turn the Printer back On
Finally, turn on the printer again and check if it has been reset successfully. This step should eliminate any problems that the printer was previously facing, such as errors or glitches.
Conclusion
Resetting the Epson LQ635 printer is an essential maintenance task that can help keep the printer working correctly. It is a straightforward process that involves holding down the Load/Eject button while turning on the printer, and then releasing the button after the self-test printout starts. After turning off the printer and turning it back on again, it should be reset and ready to use. If you encounter any issues during the reset process or afterward, consult the printer manual or contact Epson support for assistance.
